Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 prc.... curtis or defiance ??
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="vancewalker007" data-source="post: 1959926" data-attributes="member: 66917"><p>I have 2 loads that shot the best. I worked on the Hornady ELDM and ELDX first back in Jan 2019. The ELDX out shot the ELDM be a little so stuck with it. It's 59.0 H1000 at 15 thou off, Hornady case, and CCI BR-2 primers. Then the 156 Berger came along so I worked on a load for it. My ladder went to 58.6 of H1000. The 58.6 left a slight ejector mark on the case so I backed down to 58.2 which was in a velocity node to try so groups. At 15 off I found a Sub 1/2 MOA group. So my second load is same cases, same primers, 156 at 15 off over 58.2 of H1000.</p><p></p><p>And I am using a .294 initial bushing and a .290 final bushing to produce approximately 2 thou of neck tension. If you use different cases your bushing will vary. I am using the Hornady Match Grade die set. It's been good to me do far.</p></blockquote><p></p>
[QUOTE="vancewalker007, post: 1959926, member: 66917"] I have 2 loads that shot the best. I worked on the Hornady ELDM and ELDX first back in Jan 2019. The ELDX out shot the ELDM be a little so stuck with it. It's 59.0 H1000 at 15 thou off, Hornady case, and CCI BR-2 primers. Then the 156 Berger came along so I worked on a load for it. My ladder went to 58.6 of H1000. The 58.6 left a slight ejector mark on the case so I backed down to 58.2 which was in a velocity node to try so groups. At 15 off I found a Sub 1/2 MOA group. So my second load is same cases, same primers, 156 at 15 off over 58.2 of H1000. And I am using a .294 initial bushing and a .290 final bushing to produce approximately 2 thou of neck tension. If you use different cases your bushing will vary. I am using the Hornady Match Grade die set. It's been good to me do far. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 prc.... curtis or defiance ??
Top