Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 PRC 156 load development
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="TAZMAN" data-source="post: 2171893" data-attributes="member: 1708"><p>I know this thread is a little old but I just got my 6.5PRC from the classifieds. I loaded up some 156 EOL and 55.5 grains of RL26 with a CCI200 primer. I have to jump them about .09 because of mag length. Initial 3 shots are .5 MOA but pretty good ejector mark with Hornady brass. I use a bushing die and have a clean barrel/chamber. Seems like this load should be moderate in about every thread I have read. I have H1000, N565, H4831SC, and many more but wanted to get some feedback. I have a 22 inch 8 twist barrel.</p></blockquote><p></p>
[QUOTE="TAZMAN, post: 2171893, member: 1708"] I know this thread is a little old but I just got my 6.5PRC from the classifieds. I loaded up some 156 EOL and 55.5 grains of RL26 with a CCI200 primer. I have to jump them about .09 because of mag length. Initial 3 shots are .5 MOA but pretty good ejector mark with Hornady brass. I use a bushing die and have a clean barrel/chamber. Seems like this load should be moderate in about every thread I have read. I have H1000, N565, H4831SC, and many more but wanted to get some feedback. I have a 22 inch 8 twist barrel. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 PRC 156 load development
Top