Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-300 loaded neck diameter
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="dok7mm" data-source="post: 2306199" data-attributes="member: 90080"><p>Not familiar with 300 WB brass thickness, so I can't guess the thickness when necked down to 6.5. Check some fired rounds to see if new bullets will slide thru the neck easily. If not, you'll need to turn necks.</p><p></p><p>I like to have .003"- .004" clearance in chamber neck. If you have any factory rounds fired in your chamber, you can check the neck OD and add .001" to get close to your chamber neck spec. It should give you a good idea on how much to turn.</p></blockquote><p></p>
[QUOTE="dok7mm, post: 2306199, member: 90080"] Not familiar with 300 WB brass thickness, so I can't guess the thickness when necked down to 6.5. Check some fired rounds to see if new bullets will slide thru the neck easily. If not, you'll need to turn necks. I like to have .003"- .004" clearance in chamber neck. If you have any factory rounds fired in your chamber, you can check the neck OD and add .001" to get close to your chamber neck spec. It should give you a good idea on how much to turn. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-300 loaded neck diameter
Top