Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5-06 Using Reloder 22
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="scottishkat" data-source="post: 1852256" data-attributes="member: 82202"><p>I have an old school M700 custom 6.5-06 with a 25" barrel. It has a good bit of free bore with 130 VLDH approx. .110 with bullets seated with .264 grip.</p><p></p><p>RL 22 has been pretty darn good accuracy wise at 51 grains. I'm going to work up to 53. H1000 has been good as well but not quite as accurate as RL22. I worked up to 56 grains with no pressure I will work up to 58 g of H1000 in .5 grain increments and see if accuracy improves. </p><p></p><p>I would like to try RL 23 as I here the temperature sensitivity is better but I'm confused here with the posts about 6.5 Sherman. Bill C assume your shooting 6.5 Sherman as I cant load a 130 to 2.414 CBTO. </p><p></p><p>Anybody have a good starting point for 130 grain VLDH in 6.5-06 with Lapua 30-06 cases necked down with a capacity of approx. 62 grains of water? I'm using WLR primers but am open to trying others.</p><p></p><p>Good luck and shoot straight y'all</p></blockquote><p></p>
[QUOTE="scottishkat, post: 1852256, member: 82202"] I have an old school M700 custom 6.5-06 with a 25" barrel. It has a good bit of free bore with 130 VLDH approx. .110 with bullets seated with .264 grip. RL 22 has been pretty darn good accuracy wise at 51 grains. I'm going to work up to 53. H1000 has been good as well but not quite as accurate as RL22. I worked up to 56 grains with no pressure I will work up to 58 g of H1000 in .5 grain increments and see if accuracy improves. I would like to try RL 23 as I here the temperature sensitivity is better but I'm confused here with the posts about 6.5 Sherman. Bill C assume your shooting 6.5 Sherman as I cant load a 130 to 2.414 CBTO. Anybody have a good starting point for 130 grain VLDH in 6.5-06 with Lapua 30-06 cases necked down with a capacity of approx. 62 grains of water? I'm using WLR primers but am open to trying others. Good luck and shoot straight y'all [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5-06 Using Reloder 22
Top