Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-06 Info needed
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="davewitt" data-source="post: 502866" data-attributes="member: 29579"><p>In reloading the 6.5-06 I have found that forming brass out of 25-06 winchester</p><p>brass is the way to go. You will find that necking down leads to thick necks and way to much neck tension at the least.If it is a tight necked chamber you will expierience higher pressure than you should.There is another node with 140gr bullets around 52.5gr of h4831sc. this load was safe in my win m70 with 8twist hart lhv and neck sized brass [ this keeps your headspace from getting longer than need be and your brass will not start separating at the case head after 4 fireings] The 140 a-max,sierra gameking, and hornady sst interlock along with 140berger vlds all perform admerably. I am using cci 250 magnum large rifle primers and a redding bushing neck die after the 25-06 brass has been flsized and fireformed with a 140 sierra and 49.5gr 4831sc jammed.hope this helps!</p></blockquote><p></p>
[QUOTE="davewitt, post: 502866, member: 29579"] In reloading the 6.5-06 I have found that forming brass out of 25-06 winchester brass is the way to go. You will find that necking down leads to thick necks and way to much neck tension at the least.If it is a tight necked chamber you will expierience higher pressure than you should.There is another node with 140gr bullets around 52.5gr of h4831sc. this load was safe in my win m70 with 8twist hart lhv and neck sized brass [ this keeps your headspace from getting longer than need be and your brass will not start separating at the case head after 4 fireings] The 140 a-max,sierra gameking, and hornady sst interlock along with 140berger vlds all perform admerably. I am using cci 250 magnum large rifle primers and a redding bushing neck die after the 25-06 brass has been flsized and fireformed with a 140 sierra and 49.5gr 4831sc jammed.hope this helps! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-06 Info needed
Top