Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5-06 build but to AI it or Gibbs it or leave it like it is?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="antelopedundee" data-source="post: 1980436" data-attributes="member: 107384"><p>The only/best way to start with 270 brass and end up with the desired length is to first use the fast powder method [say 20 grains of dirty bullseye] with maybe some tissue in the end. Then you will need to size it down to say .25 caliber because it may be too long to fit in the chamber and will have to go up into the rifling. In my case I tried sizing it down in a 6.5-06 die with no expander and that case would not easily chamber in my rifle. Once formed you can trim it back if necessary "if" it shortens up by the proper amount.</p></blockquote><p></p>
[QUOTE="antelopedundee, post: 1980436, member: 107384"] The only/best way to start with 270 brass and end up with the desired length is to first use the fast powder method [say 20 grains of dirty bullseye] with maybe some tissue in the end. Then you will need to size it down to say .25 caliber because it may be too long to fit in the chamber and will have to go up into the rifling. In my case I tried sizing it down in a 6.5-06 die with no expander and that case would not easily chamber in my rifle. Once formed you can trim it back if necessary "if" it shortens up by the proper amount. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5-06 build but to AI it or Gibbs it or leave it like it is?
Top