Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
585 HE -- Barrels of Cases --
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="hubel458" data-source="post: 1134372" data-attributes="member: 6474"><p>Here is couple different setups our guys checking for our 585HE</p><p>in a long, Lawton Cheytac action. First laminated thumbhole stock.</p><p>Second in a Hogue Compstock. The action can mount a scope rail</p><p>like shown on the table in 1st picture or a receiver sight in 2nd picture.</p><p>The scope rail is a piccatiny,. if you need long range work.</p><p></p><p><img src="http://www.gunownerstv.com/lawtonthumb.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p><p></p><p><img src="http://www.gunownerstv.com/lawtonhogue.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p><p></p><p>The stocks used were wide ones for REM long actions, just add recoil</p><p>block ahead of recoil inleting for the longer action, drill new screw hole</p><p>Open the stock forward to original bolt hole for longer cases and mag.</p><p></p><p>About Enfields for our case, one of my favorites, Some don't like the</p><p>sporterizing, welding bottom metal straight. Many think straightening</p><p>is a huge job needing special jigs, etc, Not really, just use one for a jig</p><p>with a bolt, to weld on the straight extension, Do top weld, then cut old</p><p>extension that is under off with a thin cutting wheel, then weld bottom.</p><p>When we bolt the short piece on the one we are straightening, we grind</p><p>the short slant off so the added piece lays on there flat.</p><p>The one you cut off can be used as the top extension for the next one!!!</p><p>Just keep on building...Ed</p><p></p><p><img src="http://www.gunownerstv.com/guardlen.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p></blockquote><p></p>
[QUOTE="hubel458, post: 1134372, member: 6474"] Here is couple different setups our guys checking for our 585HE in a long, Lawton Cheytac action. First laminated thumbhole stock. Second in a Hogue Compstock. The action can mount a scope rail like shown on the table in 1st picture or a receiver sight in 2nd picture. The scope rail is a piccatiny,. if you need long range work. [IMG]http://www.gunownerstv.com/lawtonthumb.jpg[/IMG] [IMG]http://www.gunownerstv.com/lawtonhogue.jpg[/IMG] The stocks used were wide ones for REM long actions, just add recoil block ahead of recoil inleting for the longer action, drill new screw hole Open the stock forward to original bolt hole for longer cases and mag. About Enfields for our case, one of my favorites, Some don't like the sporterizing, welding bottom metal straight. Many think straightening is a huge job needing special jigs, etc, Not really, just use one for a jig with a bolt, to weld on the straight extension, Do top weld, then cut old extension that is under off with a thin cutting wheel, then weld bottom. When we bolt the short piece on the one we are straightening, we grind the short slant off so the added piece lays on there flat. The one you cut off can be used as the top extension for the next one!!! Just keep on building...Ed [IMG]http://www.gunownerstv.com/guardlen.jpg[/IMG] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
585 HE -- Barrels of Cases --
Top