Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.375 Norma
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Swamplord" data-source="post: 939755" data-attributes="member: 2460"><p>Yes, the 423 Dakota brass will work for the 338 Norma Mag, </p><p></p><p>I have a set of Forster 338 Norma Mag dies and will be using them to size the neck down to 338, I also have a 338 PRO reamer and have a barrel that has been fitted and chambered then removed so I could work with the 375 version, my intention is to use those dies to create some fired brass and send both to Jim Carstensen for conversion into bushing dies for my 338 PRO wildcat,</p><p></p><p>He can do the same for your 338 Norma Mag, he can make the appropriate bushings for the size die to reduce the neck on the 423 Dakota to 338 , it will only require a .375" bushing and the .338" .. of course you will need to neck turn as the neck walls will fatten up from sizing down , I think it's well worth the die conversion expense simply because you will get the excellent Lapua brass for a lot cheaper than Norma brass which runs at $49.49 per 20 pcs at Midway</p></blockquote><p></p>
[QUOTE="Swamplord, post: 939755, member: 2460"] Yes, the 423 Dakota brass will work for the 338 Norma Mag, I have a set of Forster 338 Norma Mag dies and will be using them to size the neck down to 338, I also have a 338 PRO reamer and have a barrel that has been fitted and chambered then removed so I could work with the 375 version, my intention is to use those dies to create some fired brass and send both to Jim Carstensen for conversion into bushing dies for my 338 PRO wildcat, He can do the same for your 338 Norma Mag, he can make the appropriate bushings for the size die to reduce the neck on the 423 Dakota to 338 , it will only require a .375" bushing and the .338" .. of course you will need to neck turn as the neck walls will fatten up from sizing down , I think it's well worth the die conversion expense simply because you will get the excellent Lapua brass for a lot cheaper than Norma brass which runs at $49.49 per 20 pcs at Midway [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.375 Norma
Top