Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Extreme Long Range Hunting & Shooting (ELR)
338 XC, Snipetac, or EnABELR
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Paladin300" data-source="post: 2833474" data-attributes="member: 115299"><p>I am running a RUM Improved +p out of a 27" Bartlein barrel. My accuracy node is 2775 fps with no pressure signs. I run 300 grain Berger OTMs over 91 grains of H1000. My barrel is a 6 groove Heavy Palma. I went with the improved over the edge because I could shoot the 250s and the 265 ABLR's out of my Wyatt's box. The 300 OTMs and Flatliner 256s have to be single fed. I have not had a chance to see how fast we can push the 256s and still be consistent but they should shoot around 3000+. Initial load development was with 85 grains of IMR 4350. The load was accurate but we did not crono it. We were just trying to make sure they would stabilize. My rifle is a 1/10 twist. If I had to do it again I would go 1/8 and shoot the 285 Flatliners and the 300s.</p></blockquote><p></p>
[QUOTE="Paladin300, post: 2833474, member: 115299"] I am running a RUM Improved +p out of a 27” Bartlein barrel. My accuracy node is 2775 fps with no pressure signs. I run 300 grain Berger OTMs over 91 grains of H1000. My barrel is a 6 groove Heavy Palma. I went with the improved over the edge because I could shoot the 250s and the 265 ABLR’s out of my Wyatt’s box. The 300 OTMs and Flatliner 256s have to be single fed. I have not had a chance to see how fast we can push the 256s and still be consistent but they should shoot around 3000+. Initial load development was with 85 grains of IMR 4350. The load was accurate but we did not crono it. We were just trying to make sure they would stabilize. My rifle is a 1/10 twist. If I had to do it again I would go 1/8 and shoot the 285 Flatliners and the 300s. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Extreme Long Range Hunting & Shooting (ELR)
338 XC, Snipetac, or EnABELR
Top