Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338 Edge
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="300rum" data-source="post: 393327" data-attributes="member: 6231"><p>Hi,</p><p> same problem for my 338egde. after 11 reloading on the same case I start getting case separation 1/2 from the web.</p><p></p><p>I was pushing the shoulder to much. Now I fixed the problem, after I leave a slight gape between the FL Size press and case holder in full press. (when you are lowering your FL die, the manufactures told you to lower the Die till is touching the case holder. This will drive you in case separation due to much shoulder push back, and every time when you fire, the case will expand more to return to your chamber dimension.</p><p>So the web is the area where your case will expand and you will get soon ore later the case separation.</p><p>Just turn back your FL resize die to NOT TOUCH THE CASE HOLDER (lleave a light tine hair gap between them).</p><p></p><p>I shot a 338edge with 30in Rock Crick barell</p><p>92gr H1000 (93.5gr I got sticky bolt) so I lower it down.</p><p>CCI250</p><p>300smk</p><p>Rem Brass</p><p>2830fps </p><p>I got 12 reloading per case, and trim the case 4 times.</p></blockquote><p></p>
[QUOTE="300rum, post: 393327, member: 6231"] Hi, same problem for my 338egde. after 11 reloading on the same case I start getting case separation 1/2 from the web. I was pushing the shoulder to much. Now I fixed the problem, after I leave a slight gape between the FL Size press and case holder in full press. (when you are lowering your FL die, the manufactures told you to lower the Die till is touching the case holder. This will drive you in case separation due to much shoulder push back, and every time when you fire, the case will expand more to return to your chamber dimension. So the web is the area where your case will expand and you will get soon ore later the case separation. Just turn back your FL resize die to NOT TOUCH THE CASE HOLDER (lleave a light tine hair gap between them). I shot a 338edge with 30in Rock Crick barell 92gr H1000 (93.5gr I got sticky bolt) so I lower it down. CCI250 300smk Rem Brass 2830fps I got 12 reloading per case, and trim the case 4 times. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338 Edge
Top