Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338 edge brass reforming
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="signature542" data-source="post: 450264" data-attributes="member: 14798"><p>Hi,</p><p>I have Shawn Carlock's modified die set and haven't had a problem. He uses a tapered redding expander to just open the neck without using the full stroke of the press handle. </p><p>You then changer the exapnder to a .30 cal expander and resize through the S bushed redding die.</p><p> </p><p>The expander may possibly need a tapered version which just unscrews onto the priming rod if that makes sense.</p><p> </p><p>Glad I went and bought Shawns straight up even if they cost a little more. I was going to do the same and just buy edge dies from redding</p><p> </p><p>Brand new formed Edge cases without fire forming are whacking into in 1 inch with my new girl at 300 . I will hopefully get it down to 1/2 Moa at 300 from my Sendero taper Lawton tube and indicators are I will be able to that once I fine tune the load and length a bit more. Finding the sweet spot around 93gn in MY rifle.. 94 is showing promise with no real pressure signs.Every rifle is different though work up.. I have shots touching but there is some operator error still.</p><p> </p><p>I have just had the firing pin bushed similar to a custom Lawton 7000 firing pin lets see what happens!</p></blockquote><p></p>
[QUOTE="signature542, post: 450264, member: 14798"] Hi, I have Shawn Carlock's modified die set and haven't had a problem. He uses a tapered redding expander to just open the neck without using the full stroke of the press handle. You then changer the exapnder to a .30 cal expander and resize through the S bushed redding die. The expander may possibly need a tapered version which just unscrews onto the priming rod if that makes sense. Glad I went and bought Shawns straight up even if they cost a little more. I was going to do the same and just buy edge dies from redding Brand new formed Edge cases without fire forming are whacking into in 1 inch with my new girl at 300 . I will hopefully get it down to 1/2 Moa at 300 from my Sendero taper Lawton tube and indicators are I will be able to that once I fine tune the load and length a bit more. Finding the sweet spot around 93gn in MY rifle.. 94 is showing promise with no real pressure signs.Every rifle is different though work up.. I have shots touching but there is some operator error still. I have just had the firing pin bushed similar to a custom Lawton 7000 firing pin lets see what happens! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338 edge brass reforming
Top