Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
338 builds (lapua/edge/or the like) lets see them.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="ATH" data-source="post: 1986663" data-attributes="member: 1656"><p>I don't know if there are magazine window dimensional differences between a stock R700 and a clone. I can tell you I built a repeater using a Stiller Predator (R700 footprint). I used the long Wyatt's box. I had to machine the action to lengthen the mag window on the back end significantly. I don't have a mill so a Dremel and a lot of patience used. The gets the Wyatt's box to fit. Then I had to modify the bolt stop to let the bolt come back further to pick up the rounds. They feel lips on the Wyatt's box were sharp and needed some work but it feeds reliably.</p></blockquote><p></p>
[QUOTE="ATH, post: 1986663, member: 1656"] I don't know if there are magazine window dimensional differences between a stock R700 and a clone. I can tell you I built a repeater using a Stiller Predator (R700 footprint). I used the long Wyatt's box. I had to machine the action to lengthen the mag window on the back end significantly. I don't have a mill so a Dremel and a lot of patience used. The gets the Wyatt's box to fit. Then I had to modify the bolt stop to let the bolt come back further to pick up the rounds. They feel lips on the Wyatt's box were sharp and needed some work but it feeds reliably. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
338 builds (lapua/edge/or the like) lets see them.
Top