Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338-06AI New Owner Need Load Data
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Shane Lindsey" data-source="post: 3099244" data-attributes="member: 25831"><p>That weight bullet with Varget has been good in my 338 Sherman. A tiny bit more capacity, but did well with the 175/213gr monos.</p><p>Not super fast with the heavier, but accurate/consistent. 6.5 Stabal is another one that has worked on the heavier, so your H4350 may as well.</p><p></p><p>I had to use 270/280/280ai brass for proper length. I think you could just take virgin cases. I necked up to 30 cal, then 35 and back down to 338 to create a flase shoulder and then jammed .010" for fireforming. I used graphite in the necks for all sizing, but did not full length size, just enough in the necks to get them expanded. I annealed after the first firing once formed, then full length sized.</p><p></p><p>I would imagine you may not need to do all that as your length is the same. I would lube necks and carefully try to expand the necks on a few trash cases (what I did to practice and make sure all was well). I would jam .020" with medium charge weights to form. Maybe just do a few to start with to make sure it is happy, happy.</p><p></p><p>Good luck and keep us posted.</p></blockquote><p></p>
[QUOTE="Shane Lindsey, post: 3099244, member: 25831"] That weight bullet with Varget has been good in my 338 Sherman. A tiny bit more capacity, but did well with the 175/213gr monos. Not super fast with the heavier, but accurate/consistent. 6.5 Stabal is another one that has worked on the heavier, so your H4350 may as well. I had to use 270/280/280ai brass for proper length. I think you could just take virgin cases. I necked up to 30 cal, then 35 and back down to 338 to create a flase shoulder and then jammed .010" for fireforming. I used graphite in the necks for all sizing, but did not full length size, just enough in the necks to get them expanded. I annealed after the first firing once formed, then full length sized. I would imagine you may not need to do all that as your length is the same. I would lube necks and carefully try to expand the necks on a few trash cases (what I did to practice and make sure all was well). I would jam .020" with medium charge weights to form. Maybe just do a few to start with to make sure it is happy, happy. Good luck and keep us posted. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338-06AI New Owner Need Load Data
Top