Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300wsm 190vld. H4350 or 4381sc loads?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="shawnb" data-source="post: 1101523" data-attributes="member: 25630"><p>Well i made it out to shoot a bit today. I made 5 rounds of h4350 at 62.5gr for sighters and then tested the 4831sc loads. I had no chrono so no velocity numbers. The best 4831sc load was at 67gr. All 3 rounds were touching and formed the half football type line so it looks like it should be decent. But the one that surprised me was my sighters. It took 1 shot on paper then made an adjustment and put 2 in the same hole with cold clean bore. I fired my 4831 loads and saved the last 2 sighter for last and again they went in the same hole.</p><p></p><p>Ill make that same sighter load and the 67gr load to test at distance and see which holds together better and run with that.</p><p></p><p>Components are prepped remington brass and 215m primers with the above powder and bullets shooting at 100 yards.</p></blockquote><p></p>
[QUOTE="shawnb, post: 1101523, member: 25630"] Well i made it out to shoot a bit today. I made 5 rounds of h4350 at 62.5gr for sighters and then tested the 4831sc loads. I had no chrono so no velocity numbers. The best 4831sc load was at 67gr. All 3 rounds were touching and formed the half football type line so it looks like it should be decent. But the one that surprised me was my sighters. It took 1 shot on paper then made an adjustment and put 2 in the same hole with cold clean bore. I fired my 4831 loads and saved the last 2 sighter for last and again they went in the same hole. Ill make that same sighter load and the 67gr load to test at distance and see which holds together better and run with that. Components are prepped remington brass and 215m primers with the above powder and bullets shooting at 100 yards. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300wsm 190vld. H4350 or 4381sc loads?
Top