Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WM 208 AMAX neck tension issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Weston" data-source="post: 1084044" data-attributes="member: 37187"><p>I had initially just FL sized all the brass (new) trimmed to spec, tumbled to remove lube and then loaded. I have measured the bergers at .3080 compared to the amax at .3075.</p><p>Now when I could not get the Amax to hold without a crimp I decided to try to run the brass (which had already been full length sized, though the lee collet neck sizing die I have, which then provided sufficient neck tension to hold the Amax. As far as "hand seating" I attempted to see if the bullets could be forced into the case neck without using a press, which they couldn't, regardless of the die.</p></blockquote><p></p>
[QUOTE="Weston, post: 1084044, member: 37187"] I had initially just FL sized all the brass (new) trimmed to spec, tumbled to remove lube and then loaded. I have measured the bergers at .3080 compared to the amax at .3075. Now when I could not get the Amax to hold without a crimp I decided to try to run the brass (which had already been full length sized, though the lee collet neck sizing die I have, which then provided sufficient neck tension to hold the Amax. As far as "hand seating" I attempted to see if the bullets could be forced into the case neck without using a press, which they couldn't, regardless of the die. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WM 208 AMAX neck tension issue
Top