• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

300 Win Mag - Used Brass (Various Lot)

AKBear

Well-Known Member
Joined
Feb 1, 2011
Messages
89
Location
Colorado
Sold my 300 WM and getting the remainder of my components sorted and posted for sale.

I acquired the following brass from various sources.

All are or appeared to be once fired as the case heads around the primers still had the factory applied seal around the primer visible when I obtained them or appeared to have an original factory primer installed. Some were from a friend, some were from various shooters from the range who didn't reload and some were from the brass bucket at the range.

The following brass has been cleaned and the primer flash hole deburred:

Winchester "W-W Super" – 132 pcs

Winchester "W-W Super" nickel coated – 17 pcs (one has a slight finish issue)

Remington "R–P" - 61 pcs

Remington "R-P" Nickel Coated – 3 pcs

Barnes "Barnes" – 43 pcs

256 Total

The following brass has not been cleaned but is de-primed:

Remington "R-P" factory loads/fired and reloaded TWICE – 39 pcs (I'm the original owner of this batch. Factory loads to use for barrel break in then for reloading in my Sendero).

Hornady "Hornady" range brass and reloaded TWICE by me– 10 pcs

Federal "FC" range brass and reloaded ONCE by me – 7 pcs

Winchester "W-W Super" range brass and reloaded ONCE by me – 4 pcs

60 Total

All the brass will be separated in bags and labeled as inventoried above.

The photo is some but not all of the brass.

$225 for all of it - shipped U.S.P.S Priority
 

Attachments

  • IMG_9736.jpg
    IMG_9736.jpg
    94.6 KB · Views: 19
Top