Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 Weatherby Load Help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mysticplayer" data-source="post: 99565" data-attributes="member: 8947"><p>Confirm that your throat is not too long ie bullet must engrave the lands before leaving the case neck. If there is a jump, accuracy will always be poor.</p><p></p><p>H1000, Retumbo would be my choices for the heavies. I have shot h4831SC with light 155/168gr bullets and this was really good. However, would go slower powder for the weights you are thinking about.</p><p></p><p>Use Fed 215M primers. collet or bushing size your brass and monitor runout. Work up load.</p><p></p><p>Make sure that the bedding was done right and that the action is not bending. You don't need to torque a stock down. if the bedding is done properly, firm hand tight is plenty.</p><p></p><p>The use of so called torque is a bandaid to other stock problems.</p><p></p><p>Jerry</p></blockquote><p></p>
[QUOTE="Mysticplayer, post: 99565, member: 8947"] Confirm that your throat is not too long ie bullet must engrave the lands before leaving the case neck. If there is a jump, accuracy will always be poor. H1000, Retumbo would be my choices for the heavies. I have shot h4831SC with light 155/168gr bullets and this was really good. However, would go slower powder for the weights you are thinking about. Use Fed 215M primers. collet or bushing size your brass and monitor runout. Work up load. Make sure that the bedding was done right and that the action is not bending. You don't need to torque a stock down. if the bedding is done properly, firm hand tight is plenty. The use of so called torque is a bandaid to other stock problems. Jerry [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 Weatherby Load Help
Top