Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 wby help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="David Emerson" data-source="post: 1975905" data-attributes="member: 112579"><p>Be careful with jb bore paste. Never pull it out of the muzzle. Usually if a rifle is shooting dirty you are running too low a charge and too low of a pressure. I only use jb if a rifle starts to build pressure or the groups open. Wrap a patch around a brush `and run up about half the length of your barrel and then back into the chamber. Usually just in front of the throat is the bad spot. Sometimes a gun just does not like a certain bullet. Have any 180 sierras? My go to load in the 300 is 83 of H4831 and a 180. If it won,t shoot that it won,t shoot anything. Of course start at 81 and work up. I use a cci 250 primer. Good luck!! I forgot to add. In my experience the accubond LR bullets are very soft.</p></blockquote><p></p>
[QUOTE="David Emerson, post: 1975905, member: 112579"] Be careful with jb bore paste. Never pull it out of the muzzle. Usually if a rifle is shooting dirty you are running too low a charge and too low of a pressure. I only use jb if a rifle starts to build pressure or the groups open. Wrap a patch around a brush `and run up about half the length of your barrel and then back into the chamber. Usually just in front of the throat is the bad spot. Sometimes a gun just does not like a certain bullet. Have any 180 sierras? My go to load in the 300 is 83 of H4831 and a 180. If it won,t shoot that it won,t shoot anything. Of course start at 81 and work up. I use a cci 250 primer. Good luck!! I forgot to add. In my experience the accubond LR bullets are very soft. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 wby help
Top