Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.284 Chamber Questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="can1010" data-source="post: 1521002" data-attributes="member: 43193"><p>the problem is the brass being .4945-.495 when new and blowing out to .499 on first firing then some dies sizing it back down .496 then after multiple firings it will crack like case head separation even with minimal shoulder bump. that is why the first post was asking about different reamers. I had Bartram brass crack in five firings switched to Whidden die and it holds the case to .500 without sizing it and it solved my problem no more case head separation.</p></blockquote><p></p>
[QUOTE="can1010, post: 1521002, member: 43193"] the problem is the brass being .4945-.495 when new and blowing out to .499 on first firing then some dies sizing it back down .496 then after multiple firings it will crack like case head separation even with minimal shoulder bump. that is why the first post was asking about different reamers. I had Bartram brass crack in five firings switched to Whidden die and it holds the case to .500 without sizing it and it solved my problem no more case head separation. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.284 Chamber Questions
Top