Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
.270 win help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="ropeNshoot" data-source="post: 877851" data-attributes="member: 70717"><p>Guys, I need a little help on which direction to head with this load. I'm shooting a Rem 700 ADL in .270 win. I have a load worked up using 130g SST's and 61g of H4831sc and WLR primers. Bullet is seated 20 thou off the lands and I'm getting groups of three under .5". Why change right? I want to use a 130 Speer Grand Slam as well. My first tests were with this bullet and H4831sc using an OCW method. Group averages were 1.5" at 100yds. Disappointed, I tried H4350. The sighters in my OCW test were all three touching while every group after was 1.5"-2". This was all done at 100yds from a bench and all of the bullets were seated to the published depths. Any suggestions on what direction to go from here?</p></blockquote><p></p>
[QUOTE="ropeNshoot, post: 877851, member: 70717"] Guys, I need a little help on which direction to head with this load. I'm shooting a Rem 700 ADL in .270 win. I have a load worked up using 130g SST's and 61g of H4831sc and WLR primers. Bullet is seated 20 thou off the lands and I'm getting groups of three under .5". Why change right? I want to use a 130 Speer Grand Slam as well. My first tests were with this bullet and H4831sc using an OCW method. Group averages were 1.5" at 100yds. Disappointed, I tried H4350. The sighters in my OCW test were all three touching while every group after was 1.5"-2". This was all done at 100yds from a bench and all of the bullets were seated to the published depths. Any suggestions on what direction to go from here? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
.270 win help
Top