Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
270 Wby brass won't go into sizing die!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="sambo3006" data-source="post: 221425" data-attributes="member: 2740"><p>I got a brand new set of RCBS 270 Wby dies and picked up two different lots of once fired brass totalling 38 pieces. I tumbled all of it and wiped it off. I lubed up with Imperial sizing wax as usual and couldn't get the ram to go all the way down on the brass. I lacked maybe a 16th or 32nd of an inch. I didn't try every piece of brass but none of the brass I sampled from either lot would go all the way into the sizing die. I tried to chamber some of them in my Mk V and they wouldn't go either. What gives? Do I have a die set and chamber that are both close to minimum spec and two lots of brass that came from large chambers? The odds of that seem pretty low but I am stumped. Ideas?</p><p></p><p>Sam</p></blockquote><p></p>
[QUOTE="sambo3006, post: 221425, member: 2740"] I got a brand new set of RCBS 270 Wby dies and picked up two different lots of once fired brass totalling 38 pieces. I tumbled all of it and wiped it off. I lubed up with Imperial sizing wax as usual and couldn't get the ram to go all the way down on the brass. I lacked maybe a 16th or 32nd of an inch. I didn't try every piece of brass but none of the brass I sampled from either lot would go all the way into the sizing die. I tried to chamber some of them in my Mk V and they wouldn't go either. What gives? Do I have a die set and chamber that are both close to minimum spec and two lots of brass that came from large chambers? The odds of that seem pretty low but I am stumped. Ideas? Sam [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
270 Wby brass won't go into sizing die!!
Top