Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
264 win mag headspace question/problem
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="TxPhred" data-source="post: 2657438" data-attributes="member: 56833"><p>Question, are you lubing the inside of the case neck when (if) your expander ball exits the case? I had a similar issue and after much back and forth I discovered the expander ball was pulling the neck and causing a similar issue. I also took an old feeler gauge I had and cut the desired thickness and place inside the base of the shell holder contacting the bottom of the case, to do the same as some suggest by sanding down the top of the shell holder. Try sizing a case without the expander ball and see if the case will chamber, this is a quick check for what I am describing. Good luck.</p></blockquote><p></p>
[QUOTE="TxPhred, post: 2657438, member: 56833"] Question, are you lubing the inside of the case neck when (if) your expander ball exits the case? I had a similar issue and after much back and forth I discovered the expander ball was pulling the neck and causing a similar issue. I also took an old feeler gauge I had and cut the desired thickness and place inside the base of the shell holder contacting the bottom of the case, to do the same as some suggest by sanding down the top of the shell holder. Try sizing a case without the expander ball and see if the case will chamber, this is a quick check for what I am describing. Good luck. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
264 win mag headspace question/problem
Top