Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
260 Rem loads
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jimbires" data-source="post: 2746084" data-attributes="member: 11011"><p>I ran your info through quickload using a 22" bbl . I just used default settings , since I don't know all your particulars . your info is all making sense . it is following along quickload pretty close , even without fine tuning . </p><p></p><p>the 260 is rated at 60191 PSI </p><p>using a 143 ELDx bullet</p><p>42.0 grains of H4350 gives 2699 FPS at 62624 PSI ( over MAX )</p><p>41.0 grains of H4350 gives 2637 FPS at 58099 PSI </p><p>40.5 grains of H4350 gives 2607 FPS at 55965 PSI</p><p></p><p></p><p></p><p> I used all the same default settings as above , but switched to RL26 powder . </p><p></p><p>using the 143 ELDx bullet </p><p>47.5 grains of RL26 gives 2845 FPS at 60047PSI (MAX) </p><p>43.5 grains of RL26 gives 2571 FPS at 43308PSI (MIN) </p><p></p><p></p><p> if your looking for more velocity , you need to change powder . RL26 gives the highest velocity in the 260 using the 140 weight bullets .</p></blockquote><p></p>
[QUOTE="jimbires, post: 2746084, member: 11011"] I ran your info through quickload using a 22" bbl . I just used default settings , since I don't know all your particulars . your info is all making sense . it is following along quickload pretty close , even without fine tuning . the 260 is rated at 60191 PSI using a 143 ELDx bullet 42.0 grains of H4350 gives 2699 FPS at 62624 PSI ( over MAX ) 41.0 grains of H4350 gives 2637 FPS at 58099 PSI 40.5 grains of H4350 gives 2607 FPS at 55965 PSI I used all the same default settings as above , but switched to RL26 powder . using the 143 ELDx bullet 47.5 grains of RL26 gives 2845 FPS at 60047PSI (MAX) 43.5 grains of RL26 gives 2571 FPS at 43308PSI (MIN) if your looking for more velocity , you need to change powder . RL26 gives the highest velocity in the 260 using the 140 weight bullets . [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
260 Rem loads
Top