Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
260 Rem Load Recipeies?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Clark" data-source="post: 728505" data-attributes="member: 6600"><p>I am sure my data is no good to anyone else at all. </p><p>I built 3 rifles, in the fall of 2012 went to the hunting area a week ahead for target practice and load development, and shot the 260 and 7mmRM less and shot more practice and killed the animals with the 257RAIR.</p><p></p><p>The 260 data from the fall of 2012:</p><p>Lapua 308 Palma brass with turned necks, SAAMI 260 reamer, Shilen #3 taper stainless 9" twist finished at 24", 11 degree crown, CCI 450 small rifle magnum primer, 120 Nosler Ballistic tip moly bullets, 2.840" OAL, 40 gr Hodgdon CFE223 ~ 2900 fps, more powder would not get set off by the primer. </p><p></p><p>After some experimentation, I was only using the KG1, KG12, Kroil, Flitz, and Brownell's moly paste.</p><p>This was a great way to break in a barrel with the slow to Copper foul CFE223 powder.</p></blockquote><p></p>
[QUOTE="Clark, post: 728505, member: 6600"] I am sure my data is no good to anyone else at all. I built 3 rifles, in the fall of 2012 went to the hunting area a week ahead for target practice and load development, and shot the 260 and 7mmRM less and shot more practice and killed the animals with the 257RAIR. The 260 data from the fall of 2012: Lapua 308 Palma brass with turned necks, SAAMI 260 reamer, Shilen #3 taper stainless 9" twist finished at 24", 11 degree crown, CCI 450 small rifle magnum primer, 120 Nosler Ballistic tip moly bullets, 2.840" OAL, 40 gr Hodgdon CFE223 ~ 2900 fps, more powder would not get set off by the primer. After some experimentation, I was only using the KG1, KG12, Kroil, Flitz, and Brownell's moly paste. This was a great way to break in a barrel with the slow to Copper foul CFE223 powder. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
260 Rem Load Recipeies?
Top