Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
26 Nosler Wildcats - 28 Nosler (284)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Deleted member 46119" data-source="post: 1256847"><p>Attempting to formulate a reply that does not leave me with a liability or violate my QuickLoad license.</p><p></p><p>When I did my load development there was no data. Now there is at least comparative data even if it's not the same bullet.</p><p></p><p>H1000 is what I used with the 175 Sierra.</p><p>I started at 78 grains of H1000 for a %91 fill ratio. I did not go over 84 grains.</p><p>With a 24" barrel and a load that would produce ~54k psi, I got 3000fps. I feel I should have gotten more as my pressures were low.</p><p>A 26" barrel will gain ~50fps</p><p></p><p>Your COAL at max -.020 would be 3.573 which should feed great in your current setup. I don't know how much jump the ELD-X wants.</p><p></p><p>Hogdgon's site has a much lower starting point of 72.8 for Partitions at book length of 3.34. This seems to be an %86 fill ratio. Perhaps very conservative but it was tested in the lab so with new brass it's is most likely %90.</p><p></p><p>What I do is figure out the %90 fill and go with that as a starting point.</p></blockquote><p></p>
[QUOTE="Deleted member 46119, post: 1256847"] Attempting to formulate a reply that does not leave me with a liability or violate my QuickLoad license. When I did my load development there was no data. Now there is at least comparative data even if it's not the same bullet. H1000 is what I used with the 175 Sierra. I started at 78 grains of H1000 for a %91 fill ratio. I did not go over 84 grains. With a 24" barrel and a load that would produce ~54k psi, I got 3000fps. I feel I should have gotten more as my pressures were low. A 26" barrel will gain ~50fps Your COAL at max -.020 would be 3.573 which should feed great in your current setup. I don't know how much jump the ELD-X wants. Hogdgon's site has a much lower starting point of 72.8 for Partitions at book length of 3.34. This seems to be an %86 fill ratio. Perhaps very conservative but it was tested in the lab so with new brass it's is most likely %90. What I do is figure out the %90 fill and go with that as a starting point. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
26 Nosler Wildcats - 28 Nosler (284)
Top