Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.257 wildcat build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="AZShooter" data-source="post: 1160875" data-attributes="member: 5219"><p>You can use a seater die to partially reduce the neck before going with the final FL or bushing die. </p><p></p><p>Not sure how well a series of bushing dies will work in necking down from 300 to 25. There is a tendency for the case mouth to hang up on the entrance of the bushing. Too bad Redding doesn't offer those bushings with one side tapered. </p><p></p><p> You could start by running the 300 SAUM brass into the 300 SAUM FL die without the sizer ball. Then try the 25 SAUM seater die ands follow up with your final 25-300 SAUM die. It might work. </p><p></p><p>I once made a die for making 284 win brass into 6mm-284. I used the 6mm-284 reamer to make a form die then enlarged the neck area with some emery cloth. It worked quite well as the in between step.</p></blockquote><p></p>
[QUOTE="AZShooter, post: 1160875, member: 5219"] You can use a seater die to partially reduce the neck before going with the final FL or bushing die. Not sure how well a series of bushing dies will work in necking down from 300 to 25. There is a tendency for the case mouth to hang up on the entrance of the bushing. Too bad Redding doesn't offer those bushings with one side tapered. You could start by running the 300 SAUM brass into the 300 SAUM FL die without the sizer ball. Then try the 25 SAUM seater die ands follow up with your final 25-300 SAUM die. It might work. I once made a die for making 284 win brass into 6mm-284. I used the 6mm-284 reamer to make a form die then enlarged the neck area with some emery cloth. It worked quite well as the in between step. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.257 wildcat build
Top