Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.25 Accubond BC correct???
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Qzilla" data-source="post: 174941" data-attributes="member: 6073"><p>I was starting to shoot some longer ranges tonight with my new 257 and I either found an issue with Exbal, the BS for the Accubond or my rifle??</p><p></p><p>The rifle is shooting lights out at 100 yards. It shot this way both during break in and after.</p><p></p><p>My load is 74gr H1000, 110gr Accubond (BC .418), COL 3.248", Barrel #4 Fluted Hart 29" Including Brake. 5 shot chronograph average was 3488 FPS.</p><p></p><p>I plugged everything into Exbal, set a target at 400 yards. Exbal says to dial in 3.75 MOA. I squeeze the first round off and it is 6" high. I scratched my head, chambered another round and 6.25" high?? That is 1.5 MOA wrong.</p><p></p><p>Is it Exbal? My gun? The BC of the bullet? My Chronograph? What gives?</p></blockquote><p></p>
[QUOTE="Qzilla, post: 174941, member: 6073"] I was starting to shoot some longer ranges tonight with my new 257 and I either found an issue with Exbal, the BS for the Accubond or my rifle?? The rifle is shooting lights out at 100 yards. It shot this way both during break in and after. My load is 74gr H1000, 110gr Accubond (BC .418), COL 3.248", Barrel #4 Fluted Hart 29" Including Brake. 5 shot chronograph average was 3488 FPS. I plugged everything into Exbal, set a target at 400 yards. Exbal says to dial in 3.75 MOA. I squeeze the first round off and it is 6" high. I scratched my head, chambered another round and 6.25" high?? That is 1.5 MOA wrong. Is it Exbal? My gun? The BC of the bullet? My Chronograph? What gives? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.25 Accubond BC correct???
Top