Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
243AI or 6mm-284?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="AZShooter" data-source="post: 261293" data-attributes="member: 5219"><p>Great thread. I have been pondering the "next one". A 105 or heavier bullet in a 6mm is appealing. I too have quite a bit of 284 brass. A few hundred that are already 25-284 just begging to be necked down one more time. </p><p></p><p>Several posters said they can get 3200-3250 with a 105-107 gr bullet. That must be a load that is deliberately downloaded slightly for longer barrel life, right? I say this because I was reading about the 6XC getting as high as 3300 with a 105 gr bullet, RL-17 and a 30" barrel <a href="http://www.6mmbr.com/reloder17.html" target="_blank">Alliant Reloder 17</a></p><p></p><p>I wonder if RL-17 would be useable in the larger 6mm-284 case. </p><p></p><p>-----------------------------------------</p><p></p><p>With your brother-in-law's 1 in 8 twist I would be inclined to use the DTAK 115 with its .585 BC</p><p></p><p>---------------------------------</p><p></p><p>Taken from 6mmBR: BALLISTICS: </p><p></p><p>"The 115-grain DTAC has approximately 10 points lower BC than a 142gr 6.5mm Sierra. Everybody's BC calculations vary so I believe this is the best way to evaluate it against the 142gr 6.5 Sierra. (Also if you look at the Berger 115gr 6mm keep in mind that Bergers BC's are not conservative at all.) This means that if you shoot the DTAC 115 at 3000 fps verses the Sierra 142 at 2950 fps then the drift at 1000 yards is virtually the same.</p><p></p><p>[Editor's Note: Henry Childs has confirmed the BC figure David is proposing. We suggest you use a .585 BC for the 115gr DTAC.]"</p><p></p><p>----------------------------------</p><p></p><p>Just imagine that bullet with more case behind it. A max load of perhaps 3150-3200 with the 6mm-284?</p><p></p><p>comments?</p></blockquote><p></p>
[QUOTE="AZShooter, post: 261293, member: 5219"] Great thread. I have been pondering the "next one". A 105 or heavier bullet in a 6mm is appealing. I too have quite a bit of 284 brass. A few hundred that are already 25-284 just begging to be necked down one more time. Several posters said they can get 3200-3250 with a 105-107 gr bullet. That must be a load that is deliberately downloaded slightly for longer barrel life, right? I say this because I was reading about the 6XC getting as high as 3300 with a 105 gr bullet, RL-17 and a 30" barrel [url=http://www.6mmbr.com/reloder17.html]Alliant Reloder 17[/url] I wonder if RL-17 would be useable in the larger 6mm-284 case. ----------------------------------------- With your brother-in-law's 1 in 8 twist I would be inclined to use the DTAK 115 with its .585 BC --------------------------------- Taken from 6mmBR: BALLISTICS: "The 115-grain DTAC has approximately 10 points lower BC than a 142gr 6.5mm Sierra. Everybody's BC calculations vary so I believe this is the best way to evaluate it against the 142gr 6.5 Sierra. (Also if you look at the Berger 115gr 6mm keep in mind that Bergers BC's are not conservative at all.) This means that if you shoot the DTAC 115 at 3000 fps verses the Sierra 142 at 2950 fps then the drift at 1000 yards is virtually the same. [Editor's Note: Henry Childs has confirmed the BC figure David is proposing. We suggest you use a .585 BC for the 115gr DTAC.]" ---------------------------------- Just imagine that bullet with more case behind it. A max load of perhaps 3150-3200 with the 6mm-284? comments? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
243AI or 6mm-284?
Top