Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
168 gr Berger results **Graphic photos**
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="bigerik" data-source="post: 396995" data-attributes="member: 15975"><p>great pics and results,</p><p> </p><p>i use the 168gr vld bergers in my rem 700 in 30-06 and really love how they preform in it.</p><p> its not a custom rifle with high end barrel and trigger,but just a plain old off the shelf ADL with 20" barrel, 25moa rail and 4-16x40mm ill mildot scope,i floated the barrel and epoxy bedded the stock.</p><p> </p><p> with factory rem ammo its a right at moa at 100yds.</p><p> </p><p>since reloading with the bergers its brought my groups down to 3/8" measured from the outside edges of the holes at 100yds. and 3/4"outside to outside at 200 yds or .442 center to center. not bad imo for a stock rifle.</p><p> </p><p>i load them about .010 of the lands, use rem brass,win lr primers, 168vld's,48.1gr h4350. i use this same load with hornady match bullets and match kings for paper.</p></blockquote><p></p>
[QUOTE="bigerik, post: 396995, member: 15975"] great pics and results, i use the 168gr vld bergers in my rem 700 in 30-06 and really love how they preform in it. its not a custom rifle with high end barrel and trigger,but just a plain old off the shelf ADL with 20" barrel, 25moa rail and 4-16x40mm ill mildot scope,i floated the barrel and epoxy bedded the stock. with factory rem ammo its a right at moa at 100yds. since reloading with the bergers its brought my groups down to 3/8" measured from the outside edges of the holes at 100yds. and 3/4"outside to outside at 200 yds or .442 center to center. not bad imo for a stock rifle. i load them about .010 of the lands, use rem brass,win lr primers, 168vld's,48.1gr h4350. i use this same load with hornady match bullets and match kings for paper. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
168 gr Berger results **Graphic photos**
Top