I have been having problems with the Ginex SRP seating fully in my brass. I thought my hand primer was wearing out. So I contacted RCBS and they sent me all new parts to rebuild it. It helped but they still are not seating fully. I even tried to use my seater on my RCBS Rockchucker to see if...
june is a 35% increase in powder again. Expect ammo to double at the same time. just a warning for everyone. Can't say where the info came from but it is not looking good for the next few years
It is NOT from the button. It is the feed rate of the reamer used after gun drilling the bore. It is not chatter as some like to think. When a button is pushed or pulled through the barrel it usually irons out the marks. When it does not it is from a larger area that is not swaged by the button...
There are types of Blazer 22rf. One is loaded by CCI, the other is loaded by Federal. The CCI loaded has a wax type of lube. The Federal has the graphite lube. I have had nothing but problems with the dry lube.
I have not shot any of the Blazers in about 4 years so the CCI loaded may not even...
Midway gets their primers from powder valley. That is who you need to contact. At least they were several years ago. And Vista is shutting down production and laying off most workers so good luck getting a resolution.
Every stuck case I ever had was when using Lee lube. I now use my own. Alcohol and lanolin at 10:1 ratio. It is super slick and the best and cheapest and easiest I have ever used.
Awesome!. It was so bad here last year the gun stores were weighing out individual charges and selling them so everyone would have at least enough to hunt. Same with 209 primers.
Go here. Put in zip codes near you. Walmarts all over have been getting shipments in. https://brickseek.com/walmart-inventory-checker/?sku=563331144
If they have it, it is $37
I blew holes threw a 3/8" ar500 steel targets with a 2506 with a 75gr vmax. Velocity is what powers through steel. The guy that told me to shoot his target was PO.