tnek13's latest activity

  • T
    No, the PRC will not kill the Creedmoor, just to answer the first question. I can not believe I read this entire post.
  • T
    tnek13 replied to the thread Brass questions.
    Starline is good brass - I have purchased Lapua, Norma, Peterson, etc and really don't see any advantage. When I reload a new cartridge...
  • T
    Close to max load of Varget (43 to 45.5gr) with Berger 168 Classic Hunter or Siera 165 Gr Gameking, never have seen a 308 that did not...
  • T
    tnek13 replied to the thread Major copper fouling?.
    I bought a 308 Savage Stealth when they first came out. It did the same thing your rifle does. It had been broken in per the previously...
  • T
    tnek13 replied to the thread Help!.
    Hornady rifle dies do not crimp. I have had the problem with Peterson Brass, I believed their claim that they were ready to load so I...
  • T
    tnek13 replied to the thread Powder Questions.
    Buy bulk whether it is 8 1lb cans or 1 8 pound jug.
  • T
    tnek13 replied to the thread Shooting in the heat.
    Chamber cooler and an air mattress pump and plastic hose. Takes a while but works - also I shoot several rifles letting the little fan...
  • T
    tnek13 replied to the thread Bipod changing point of impact.
    Yes -
  • T
    tnek13 replied to the thread Case Trimming.
    I use Little Crow trimmers. I set them to trim a couple of thousands less than max and trim after every sizing.
  • T
    Harvey. (https://harveydeprimer.com) works great, I have 2 one for standard primer holes and one for small (Peterson), OK I could change...
  • T
    I use Forster seating dies because they give me the best results. So I tried a 308 sizer die and was disappointed because the neck...
  • T
    Just get VARGET. I load 223 and 308 on your list and have tried multiple powders over the years, but Varget gives me the accuracy and in...
  • T
    tnek13 replied to the thread Group issues.
    Is this a new rifle or a new chamber or a new barrel? If it is a new barrel talk to the maker.
  • T
    tnek13 replied to the thread Accuracy And Bore Scopes.
    As has been stated Borescopes are a tool, they do not make a rifle more accurate they just show you the condition of the bore or any...
  • T
    Clean your barrel. Get a second scale to check the thrown powder loads, use the SAMMI spec COAL to start. You can load towards the...

Trending threads

Top