Recent content by SwampDog13

60.30gn rl26, .050" jump, 3035fps out of a 24" barrel plus suppressor.

Finally got to stretch the legs of my saum with the 156s and the definitely didn’t disappoint. 1004yds and crossing through 10mph winds from two different directions along the way. I'm pretty satisfied with the load. Just shy of 7 mils of elevation with .2 windage.

You should have no issue getting to the lands with the 140-147 eld bullets and still fit in the mag with a saum. My chamber has .120" freebore and the only bullet I've had issue with fitting the magazine is the Berger 156, they don't mind the jump though.

SPF

Great condition magnetospeed V3 chronograph for sale. I thought I'd still be able to find a use for it but since I purchased the labradar it hasn't been used. The bayonet and screen are flawless with no wear issues or scratches, both cords are still in great shape with only the retractable one...

My hornady lnl churns threw my bulk loads.

Neither of those have a magnum bolt face. They would either have to be machined opened up or replaced.

If your razors are going to hit the classifieds, i'd be interested.

I'm probably on the extreme side of what you're asking for but this is what I've used most for whitetails over the past 3 years, 9" 300 blackout. Suppressed subsonic hunting is my favorite when sitting in a tree stand. It's definitely not a long range rig but 100yds and in, it's a hammer.

Lots of variables here. These numbers are from my 24" saum, all shot suppressed. All of these loads I would consider just north of middle of the road as far as pressure goes, nothing crazy. These are also not the top velocities I've seen out of the gun, just what I settled on. Berger 156eol...

It's definitely more of a difficult find because it sells out fast but there are still multiple factory head stamped brass options. The adg saum brass has been great.

And it says it's all gone when I go to checkout. Showed 90+When I added the 8 to my cart.

The duck hunting down here on the SE coast leaves a lot to be desired. If you're really wanting to get into the birds the North coast around the Pamlico area is the ticket.

Welcome from down on the coast!

I finally got around to doing some load development with the 124 hammer hunters for my SAUM. Using F210Ms, 1x fired ADG brass, and reloaded 26 I found some surprisingly good accuracy but have to keep digging to find a node in the velocity range I'm after. I ran half grain charge weight...