Recent content by SubMOAR

I'll throw my name in that hat ;)

That's what I'm confused about, is how it would change the harmonics to release the bullet at a different location in the "whip", yet retain the same velocity. I have yet to do a true accuracy test to see if the Canadian made powder has the same accuracy. I only did one group and it appeared to...

Hello, I have been using IMR 4064 for my .308 Win for a while now with great results. I always get great accuracy and low ES/SD's. My go to load is the Hornady ELD-Match with 39.7 grains of IMR 4064, seated at 0.020" off lands. CCI 200 primers with LC brass. This load has been 1/2 MOA if...

Range results of my final load development. My new load is going to be 74.6 grains of H1000 with the 208 AMAX, seated at 3.485" (Mag Length). 74.6 grains was 0.685" center to center with the 4 shots. Pretty sure I pulled the last shot also, I bet I could get all 4 into one ragged hole. This...

So I decided to load the 208 AMAX to max mag length which is 3.485", since this rifle and load will be used for hunting. A shorter COL reduces the max powder capacity so I filled cases to see which one got me closest to compressed with my FC military brass, and came up with 75.0 grains of H1000...

I use IMR 4064 in my AR-15 and Bolt action 308. AR: Sig 516 w/ 4-12x Vortex Diamondback Bullet: Hornady 53 V-Max @ 2.240" Powder: IMR 4064 - 25.0-25.5 Grains (Compressed) Brass: Mixed (Literally use everything) Primer: CCI 400 Velocity 16" barrel = 2,850 FPS ---- Bullet: Hornady 55...

Hello, I have only been shooting for precision for about a year now and have been reloading for about 9 months. I reload for my 308 and 223 with great success. I have gotten my 308 and AR-15 to group sub-MOA consistently. I have been trying to develop a load for a 300 Win Mag that someone...