SSG Graybush's latest activity

CA were good, dude left, qc dropped, but I had heard that it was better now, idk personally. I would buy the new 700 Alpha 1 in 7mag 8T...

Cortina advocates .005" neck clearance. I have some chambers with .005" and some that are like .001" and in general the ones with less...

200 gr LRX with hot load (78 grs) of H1000 at 50 thou jump. That load shot .6 in my 300 wm Rem 700 LR. So a prc load would be close...

Scope bases are overlooked, this pic shows the gap in between the action and base. Bed it.

I bed all my actions, and scope bases. So yeah, absolutely. Both.

It's the scope, mounts, action screws most of the time. THEN look at the barrel and maybe the trigger, or bench set up or even shooter...

Agreed- checking scopes and mounts is a good idea before diving into other areas.

If your using new scopes, shoot with a known good scope before blaming rifle manufacturer. I was RSOing when a guy brought up a new CA...

I believe he designed it with no neck turning in mind, but my Peterson brass OD is 5 thou larger fired then sized. It's a bit much. But...

My 6XC bushing die, that Tubbs sells, puts 5 thou neck tension. It shoots excellent. I generally order bushings to put 2 to 3 thou of...

my bad

Weight?

https://www.midwayusa.com/product/1021709434?pid=976744&utm_medium=email&utm_source=service&utm_campaign=order-confirmation&utm_content=p...

Just now instock, MidwayUSA your welome

I have 12 inch steel plates out to 1000 yards (not much bigger than a milk jug) and on a good day it's no problem to hit all to 600. But...