Recent content by SnowDingo

I can’t say for sure, there web page says they can.

Check out wildcat composites. If you are willing to do some finish work http://www.wildcatcomposites.com/winchester.html#features10-23

4895 is to fast like others have said, typically the slower powder matched to the cartridge design will give higher velocity even with shorter barrel lengths. not sure what powders you have but my 27/26 Nosler on 24” likes retumbo, magnum, and lrt. Retumbo gave 3450 in 24” barrel 150 ablr. Lrt...

Jack weigand makes exactly what you are looking for https://www.jackweigand.com/

Barrett fieldcraft in 270 and 25-06 have 1-9, the new 27 Nosler carbons are 1-8.5. Only two mfg’s with a little faster twist, but it’s a start

With the bullets that Nosler has the 8.5 will do. Although I agree an 8 would be better and a 7.5-7.75 would be perfect I think there comparison is a little off I can push the 150 faster out of all the .277 than what is published and those are factory tubes excluding the 27 Nosler which is a...

Ruger is chambering in both Hawkeye and American also

After the first of the year, bullets should be on shelves by March, not sure on ammo, they are re-naming the ammo so partition will be in the partition line e-tip will be in the e-tip line and so on.

I like 1-8 twist

That is right I built one 3 years ago that has been one of my favorite cartridges, almost ready for a new barrel.

The nasgw wholesale show.

Nosler to release 27 Nosler with 165 ablr bullet the 27 will be a fast twist unsure how fast 8 would be nice. Also releasing 6.5 prc ammo, that was the highlights, nice that .277 is getting some needed support with .277 bullets

Looks like a rough chamber, try working the bolt with a fired case 20 times or so without extracting, that should give you more pronounced marks on the case and will give you proof of a rough chamber, send a picture to the smith he should have no problem correcting the issue.

Congrats! nice goat, I also like the 117 in wsm

Yorke-1 i have a 27 Nosler 1-8 benchmark that has been wonderful not quite your boondoggle, what i found with mine was that anything closer than .04 ish depending on bullet would not shoot better than 1.5moa. That and the Berger 170 didn’t like anything above 3100. But the 156 hammer at 3300...