This is 4 shots at 100yds with the Lehigh/Bloodline 250 in a Harvester sabot at 100yds with my Pro Hunter w/ .50 Encore Bergara barrel. Barrel heat more then likely had 3 and 4 go high. There is one Harvester PT clustered in the group. In a TC .50 barrel I would recommend a Harvester crushed...
.45 Encore Bergara barrel on mine.
200gr SST's in Harvester sabots 100gr BH209, Fed209A primers
Barnes 195's in Harvester sabots 100gr BH209, Nobel primers
This is a 3 shot group from last week. Temp was 92 degrees! Only a few minutes to cool between shots. 100gr BH209 200gr SST's...
TC Pro Hunter w/.45 Bergara Encore barrel. 3 shots 100yds, 100gr Blackhorn 209, Hornady 200gr SST's in a light blue Harvester sabot.
3 shots 100yds, 100gr Blackhorn 209, Barnes 195gr MZ's in a light blue Harvester sabot.
I have a .45 Omega and it shoots great with 100-110gr BH209 and Barnes 195 MZ's and Hornady 200gr SST's in a Harvester light blue sabot.
3 shots at 100yds with .45 Omega, 110gr BH209.
I use to have a .50 Omega that liked Speer 250gr Deep Curls, 100-110gr Blackhorn 209 in Harvester CR...
First start out by decarboning the flash channel with a 1/8th drill bit. If the 1/8th will not start use a smaller one and work up to the 1/8th bit. This will ensure proper ignition of BH209.
On a clean bore snap 2 primers. Run a dry patch down and out the bore to distribute the fouling...
100-110gr of Blackhorn 209, CCI209M primer, with a 260 or 300gr Harvester Scorpion PT Gold bullet with crushed rib sabots will tighten things up. Most .451 .452 250-300gr bullets in a crushed rib sabot load with just the right resistance and shoot great in the TC's.