Recent content by Sending156s

  1. Sending156s

    Brass is hard to chamber after full-length resize

    What you say makes a lot of sense as manufacturers were rushing as you said to get a hot product out the door. If you do find out if it’s tied to a certain manufacturer or reamer company please let me know. I saw one poster say he was considering not getting a 65 PRC because of that story. I...
  2. Sending156s

    Brass is hard to chamber after full-length resize

    I think okie has the best post
  3. Sending156s

    Brass is hard to chamber after full-length resize

    It surprised me when I 1st started taking better & more accurate measurements as I would rather just load & shoot. It’s 3-1/2 thou. Both of my 65 PRCs are built by GAP. im posting some measurements of the new 300 WM Peterson Long that recently came out. This is where I was getting cases ready...
  4. Sending156s

    Brass is hard to chamber after full-length resize

    Steve, I don’t see trying to diagnose the problem without having the before and after measurements. Did the OP post them & I didn’t see them. I tried to read each response. Thanks!
  5. Sending156s

    Brass is hard to chamber after full-length resize

    Could you post your new measurements & your 1x fired measurements? Thanks……the brass will tell us about your chamber.
  6. Sending156s

    Brass is hard to chamber after full-length resize

    On the article about the chambers being to tight I wanted to say I’ve never experienced the problem stated in the article. I have 2 custom 65 PRCs & have never fired a round of factory ammo. My dies are Whidden custom dies built off the reamer print (using 3x fired neck sized brass is more...
  7. Sending156s

    For Sale Nightforce Unimount 30mm

    Is it 0 or 20 MOA? i bought a badger ordnance 1.3+ that is a little to low for perfect eye alignment. Mine is a 20 MOA
  8. Sending156s

    SOLD/EXPIRED 2 Leupold VX-6 3-18x50s for sale

    Good purchase @Drillman
  9. Sending156s

    For Sale NF Atacr 4-16

    I have a NF ATACR 34mm 5x25x56 & a Leupold Mark 5HD 35mm 5x25x56. Let me know if interested & I’ll send details. Did you happen to do a tall target test checking tracking? Thanks, Have a good evening & good luck with your sale. Edit, just thought about pics from a couple of days ago. I had...
  10. Sending156s

    16.5” 6.5 prc? build

    I’m sure he’ll have an awesome rifle & be very happy. Nothing dramatic about use a pistol if you really want short & handy. A friend hunts exclusively with his pistol. Limits out on nice deer every year. And I said you were right on shot placement. About anything on our continent can be killed...
  11. Sending156s

    16.5” 6.5 prc? build

    Good luck with your project. I hope I don’t lose to much sleep worrying about your results. Have a great evening!
  12. Sending156s

    16.5” 6.5 prc? build

    Almost all rifles can get it done with the proper bullet placement and it’s definitely none of my concern what someone else builds. Just say you are going to sacrifice a LOT of velocity for convenience of easy handling. Don’t act like there’s something free in this world. You don’t gain in one...
  13. Sending156s

    16.5” 6.5 prc? build

    I have 2 GAP custom built 65 PRCs. The 26” gives me 3050 with 156s. The 24” gives me 2950 with same load. If you can get 2840 out of a 18” bbl I’m going to cut my 300 WM to 18” & get 3000 fps with 200 SMKs. SMH Just hunt with a pistol.
  14. Sending156s

    SOLD/EXPIRED Mark 5HD 3.6-18 MOA

    I have that scope and it is awesome. I hope you find a good buy on a used one, but if not there are a few still out there new for sale. I have that one & a 5x25x56 with Impact 60 reticle. I love both of them.
  15. Sending156s

    Badger Ordnance 35mm Unimount for sale (as brand new)

    I pulled a Leupold Mark 5HD off of a 65CM AR-10 Platform and replaced it with a 30mm SFP. I no longer have use for the mount. It is in like new condition and never traveled further than the range at my house. Badger Ordnance part # 1005-306-160, 35 mm dia, height is 1.5”, Zero MOA, Length 5.0”...
Top