Recent content by rms2005

hey fellow's, I loaned out 2 of my manuals to my boss the other day and just came back from cabelas with a box of 115 grain nosler combined tech for the 25-06 and low and behold he is out of town for the holiday weekend. If I remember right the combined tech's carry the same data as the regular...

No problems at all i have shot prolly 1500 noslers so far but the cost is why i am trying the sierra's however when they are gone im goin back to the noslers cause the rifles i have now prefer them.

I had the same problem in a savage 25-06 using win primers. I have always used remingtons and if i could not find them used cci untill the shortage. The win primers would flaten with the same loads used before and i backed off the load but they always flattened. I finally got my remmys back and...

Hello, i been a lurker here for a long time and supose i should start posting sooner or later. I have not used retumbo yet , my fave in my 06 is 100 gr nosler b-tips and rl 19 and if memory serves me right i use 52.5 gr. I have tried rl22 as well as a couple of others and also 115 gr b tips as...

figured I would share my findings today, bought some 100 gr noslers and a hornady case headspace gauge I figured I would look for the oal for this rifle with the 100 and 115gr b-tips. So, measuring with a fired case and a painted bullet and chambering it and measuring as well as using a cleaning...

thanks for the replies, like I said I guess after looking at them again they dont look to bad. I am just a nervous newbie to metalic reloading. even though I follow everything precisely and double check everthing I still get nervous.Oh well, better safe than sorry.

ok, yes the load I have found published in 2 manuals and it is within a 10th or two from other bullets in the same weight. It is a new gun and I was gonna try and work up the load for it for accuracy so I was seating to the recomended in 2 manuals on the two rounds I fired.they are not...

Hey all, I have been reading here for some time and found pretty much and answer here that i would need but i am clueless here, I have a new 25-06 and want a cartridge headspace gauge to set up my dies right, well looking at lyman they only make 5 different ones so this tells me there has to be...

ok i put leupold 2 piece base and had to use leupold high rings with a monarch 6-24x50 and savage 12vlp

im in the same boat, think im gonna order a couple of sets and see what happens.