Recent content by Peter.Kansas

Good information, thank you. I’m also getting a two hole touching and one an inch away on a three shot group Consistency regardless of powder charge or powder. Gave up trying to ferret it out.

Tested CX190 loads today at -10 degrees With WLR primers and 79.5 grs MPro 77.5 MPro and 72.5 IMR 4831 All fired with no issues and all hit center steel plate at 300 yards.

Let me know how they shoot, I’d like to get them tuned in. If they do, it will be a great round.

I think I’ll load up my last 32 at 79.5 grns MPRO and 3.55 COAL it gave the best ES/SDs. And see if I can get it dialed in.

The rifle I have is a Bergara with a detachable magazine that can be loaded out to 3.55. I do not have any R 26 and had to work up loads off of research and estimates. It seems to me the bullet likes jump and under max loads. At 2900-2950 it is solid out to 500 at 1325 yards I saw erratic...

100 yrd for groups Then tested at 500 and 1325 yards on steel plate. The 2.5 group was loaded to 25 thousandths of lands Best load was loaded to COAL of 3.500

Couple notes with the .308 190CX load in my 300WM Bergara, these are not SAAMI spec loads. per Hornady 2000fps is the minimum impact velocity which is 600 yds @2950 fps using SHOOTERSCALCULATORS.COM and having confirmed at 1325 yards the load has the same identical trajectory as my 190 Sierrra...