Recent content by Paramudd

I read on one message board that a guy was having the same problem. Take the action out of the stock. Then put it back in. Tighten the front stock screw first then the back one. He said it centered his action in the stock. Another one heated the stock and used a straight edge to move the...

That's a little faster than I can get out of my 16.5 in barrel LOL..

I use the berger 140gr vld's in the ruger compact 7mm-08. So does my wife. We are getting around 2550-2600 fps out of them with Varget powder. They work pretty good. I have used the Hornady 139 gr sst for several yrs also. The berger is a little more accurate usually around 1-1/2 inch out of...

Just wondering if anyone had a favorite powder for the 165 matrix in a 270 Wby. Please let me know. Thinking about trying something new!!!

This is not my longest but I was impressed by it. 373 yds With a cva apex 35 whelen. 225gr nosler accubonds at 2800 fps Not bad for a break open single shot.

Ok shot the other test loads. Got up to 3000 fps but The groups started opening up after that. Looks like 69 or so is going to be the max for h1000 in my rifle.

One that leaves a nice blood trail. The 150's don't some of the time. The 168 7mm's do every time.

Going to try some more loads this week end. I have 69.5,70,70.5,71,and 71.5 loads of H1000. Hope to find my max load. and get the speed I want. 3000 or above will do just fine in my rifle. In fact 3000 shoots about the same ballistics as my 150 bergers at 3150. I have a swarovski Pv 4-16 x 50...

If I remember correctly its 3.372. It's the longest length that will fit in my magazine

270 wby. 27inch barrel

Shot my test loads. No pressure signs . Got them up to around 2925 with 68.5grains of H1000. Also 67,68 and 68.5 Grain loads shoot through the same hole at 100 yds. I'll shoot some more in a few days and keep yall posted

My Wife and I both have ruger compacts in 7mm-08 they are both wonderful little guns. Hers will shoot dime sized groups with 140gr Bergers. Mine is an inch to inch and a half gun with the same load. Perfect little guns to walk around with.

I have some test loads that I'm going to try next week. H1000 I'll let ya know.

Can anyone give me this info?

Can anyone tell me what the g7 ballistic coefficient is?