Recent content by onzah

I have (2) stripped lowers for sale. Each lower will come with a lower parts kit(dpms i think?). $250 each plus shipping from private seller to your FFL. Stocks not included.

I have a 204 and a 6br 12 twist f/s. pm me if interested.

I have a couple of Savages with the same problem. The latest one required almost 15 MOA vertical adjustment to get to zero. I am using a Vortex Viper Scope with 60 MOA adjustment with 20 MOA base and 10 MOA Offsets in the front and back. If my calculations are correct that should give me 60...

Thats the one.

Make sure you have the right email. I have sent and received several emails in the past month.

Just a note 6.5 = 0.264 25 caliber is 0.257

To clarify, I am offering both barrels to be traded for a Savage large shank fast twist barrel in 22 or 6mm caliber.

I have two large shank savage barrels I am looking to trade. 204 Ruger large Shank Savage Take off. Unknown round count, i took on trade. It still shoots good. 0.5"-.075" consistently. 6mmbr barrel 1-12" twist. 800+- rounds. Will shoot sub 1/2" easily. I am looking for a fast...

I find it curious that so many use retumbo. I couldnt get it to build pressure and generated a lot of soot on the case regardless of the powder charge. I now use 4831 and get about 3200 with a hornady 140 amax. I dont have access to the exact load. 28" benchmark barrel.

I am not familiar with the expander ball in Forster Bench Rest Dies, but if it is similar to the hornady expander balls you should be able to run it through the 284 sizing die and you are done.

The twist rate only indicates how many inches it takes for the rifling to make one full revolution.

Enter me in the berger bullets contest

Is this still available? Does it have twist eyecups or the rubber fold down type?

You must be very careful. The Savage Rifles are a slippery slope. I also hated them and now they have taken over my safe. I have 4 now and don't see myself buying anything else.

Here is my shortlist. Calipers Hornady or Davidson gauges for measuring length to ogive press powder scale powder measure priming tool bump gauge or headspace gauge, hornady works alright, your gunsmith can make one even better when he chambers your barrel loading blocks imperial...