Recent content by NTM

The only other one that I have seen is Savage. I have a 111FL in 7mm ultra mag and I really like it. I put a timiney trigger on it and like it even more . I am in the process of putting a laminated stock on it and hopefully I will like it even more after that.

Actually there is a thread over at nolserreloading.com about the heavier bullets in the wsm-it states that nosler is advising that you stay away from the bigger bullets in the wsm. And by the way-go with the Savage-you won't be dissappointed.

I had a couple of cases look excatly like that when I first got my rifle and was working up some loads-after talking to several people and visiting several web sites the conclusion was too light a load. I was starting 10% below max and working up. Now I start 5% below max and don't have any...

lerch Sorry to hear about your moose hunt. If a large fire had gone through the area only a couple of weeks before your hunt then you can gaurntee that every animal high tailed it out of the area. There should be awsome moose hunting their in a couple of years-(little consulation to you). My...

Should work just fine-I have a 7mm rum and luv it.

No wonder you were able to make that shot-you're a fellow lefty

Finally have them. Hornady 139gr SP 74.2-90.4 grs of RL22 154 gr RN 74.5-86.1 grs of RL22 83.9-93.7 grs of RL25 162gr BTSP 75.8-85.9 grs of RL22 83.2-91.3 grs of RL25 Swift 150 gr Scirocco 78.1-84 grs of RL22 82.3-88.5 grs of RL25 140gr A Frame-79-85...

Will try to get them to you in the next couple of days. Sorry for the delay.

140 accubonds 87 gr of H4831 Fed 215 primer Rem brass That's the only load I have at the moment. I e-mailed barnes, hodgson and hornady and they sent me some loads-I don't have them handy but if you want them let me know.

wapiti13 Good point. I do have some 160 accubonds but I haven't had a chance to work up a load yet.

I shoot the 140 accubonds out of my 7mm with 88 grains of H4831. I get .5 inch groups with my Savage.

I think a couple of guys here said it-get a weatherby caliper in something other than a weatherby-great caliber-poor rifle [ 11-22-2004: Message edited by: NTM ]

Shooting a 7mm rum in a Savage. I use 86 gr of H4831 with rem brass, fed 215 primer pushing a 140gr Nosler Accubond-awsome accuracy and go velocity.

You may want to try the Nosler Accubonds-I have had great success in my 338 and my 7mm ultra mag.

Had a Ruger m77 in .338 Winchester that I used for hunting elk and moose-worked extremly well for what I was using it for.