Recent content by meangreen75

Thank you. I'll email RCBS and see what they can do. Much appreciated!

Factory loaded is .335, once fired is .340, resized above the bulge is .333. I'm using a Dillon 550 for resizing, decapping and seating. RCBS FL die.

I've got the die all of the way to the plate. It's probably possible to lower the plate and screw the die down more but it's pretty close to max. I've never sized with the die screwed in more than when it hits the plate. Shoulder to base is 2.361 (resized), once fired is 2.3625.

I need some help for the 300 H&H experienced guys. I am using an RCBS FL to decap and resize my extremely limited amount of brass. I resized piece #1 and got a bulge halfway down the neck. I brought the die down and the bulge got smaller, so I brought the die all of the down to the base and...

So I just started tumbling with corn cob media and adding car wax. I've gotten really good results but I'm wondering how many hours can you run this stuff before it's time to trash it. I've been cleaning around 100-150 pieces of either 9mm or 38 special brass for around 3 hours per load. What...

I've been hunting central Cal a couple time in the last 3 months and nothing I've sprayed on me has stopped the ticks from latching on. It seems like as soon as they get on your pant legs, they hightail it north looking for an opening. I've had to wear tan pants and stop and check every 100...

Good to see another PA on here. Class 398. Making plans for retirement next year.

Yes sir. Thank you. I was confused going from 4 dies to 2 (not including the powder die). I've also read that crimping is not always necessary with rifle rounds. I'm sure there are pros and cons, but I haven't put together enough info yet. With my 9mm, I always put on a very slight crimp.

Have you had problems with the Dillon primer on rifle brass?

Okay so you only use 2 dies on the 550?

Hello all. I'm just getting into reloading rifle after using my 550 for 9mm competition ammo. If anyone is using the 550 for rifle and has any advice, lessons learned, I would really appreciate the knowledge. I'm going to be reloading 300 win mag, 300 H&H and 6.5 CM. Thank you in advance for...