Recent content by kregg

i havent had any rem actions that sloppy 0.705 cleans the one's that i have done up. you could have greg make you one that would cut 0.710 i did have one grab on me one time and after that i started to ream them driffrent. i dont run the cutter all the way threw the action, i cut one and pull it...

you could buy a bolt from dave kiff and get the bolt face that you want, also you can have him make your bolt o.d 0.70470 that way you dont need to have your bolt sleeved just have the action opened up to 0.705 that would save you $150.00 and you have your old bolt you could sell...

Re: win model 70 classic laredo 7-mag sold

this is a nice rifle for $500.00 it has a fluted barrel with custom muzzle brake. it has a claw extractor like the pre-64 and has rings and bases on it. the stock is gray with black web in it and has ALM pillers in it. if you want to see a picture of it email me and i will sent pictures to you...

the way you said how you do your action truing is the same set up that i use with the gre-tan tooling. if you send me your barrel i charge $150.00 to chamber a bolt action rifle and $200.00 to chamber a mag. barrel threads will be spiral lock thread bead blast barrel and crown barrel. if you go...

i dont have the tools to do a weatherby only winchester and remington is the two actions that i will fully blueprint.

i charge $300.00 to true up a remington action. face off the front of action. recut action threads,recut where lugs seat,recut bolt lugs front and back,recut face of bolt and the o.d of the face of bolt, ream action out to 0.705 then put two sleeves on the bolt. i true the bolt up to be centered...

im sorry but im not going to get started on recording tapes and sending them out. any body can shoot at 2-mile targets if you got the open range and a 30-cal or bigger because you need to see your hits.

i wanted to start shooting 1000yd benchrest to see if i could set a record there this will be my 4th year shooting 1000yd benchrest and i find it harder to shoot a 10 shot group under 5- inches or a 5-shot group under a 1-1/2 then it was to get my dog. its hard to get places to shoot 2-miles...

on a com morning the 308 was just as accurate as the 338 lapua but it took the 308 about 3-sec longer to get there. when we used solid basie's that we made for our rifle's to shoot that far the 308 had 420 thousands driffents between the front base and the back one. the 338 lapua had 325 and the...

Re: \"Super-sonic\" question... silencer's only work if your bullet is sub-sonic.

hi my name is kregg slack, mr. goodgrouper no body ever called me for anything. so what you told these people is a lie. i dont shoot the 2-mile targets any more but i do still have some of our shoots on tape. my 338 lapua would get to the target in 8-sec and my vel was still at about 900 f.p.s...

i also make and install muzzle brakes, my price is hard to beat. my web site is www.parrysgunsmithing.com

WHAT YOU DO IS SET A TARGET UP AT 3100 YARDS THIS TAKES TWO PEOPLE TO DO THIS WITH A RANGE FINEDER. THEN YOU HAVE A TARGET TO SHOOT AT BEFORE THE DOGS COME OUT. I DONT DO THIS TYPE OF SHOOTING ANY MORE. I NOW SHOOT BENCHREST AT 1000YDS. AND TO TELL YOU THE TRUTH ITS HARDER TO SHOOT A GOOD GROUP...

i dont see anything wrong with it, if you see something let me know. thank you