Recent content by KIWI AL

+1 i really like the quality and features of night force but for me on packing rifles the wieght and bulk is the deal breaker.

a brake or maybe even a can is the best way i'v found taming muzzle jump. i use a vias type brake on my 8.2 pound rig in 7saum with a mcmillan edge sporter stock. as this is my every day hunting rifle i only fit the brake when preparing to take a long shot or setting up for a ambush

mk4, with a tmr rectical if the price is right. the nxs is a more user frendly unit than the mk4's even when you have both it's a hard choice

my 7mm has a no4 at 26" unfluted, mcmillan hunters edge, with a mk4 wieght is 8.2 pounds (action is rem ti). i'm wanting to use a no5 or maybe 6 at 24" next barrel

6.5x47 is a great high volume round, i don't think there is much of a selection of factory ammo thou. my favourite varminter is a 700 chambered in 6x47 lapua shooting 108 berger's. a good mix of ballistics and barrell life as i also use it for f-class

unfluted, the smith wasnt keen on it.

the specs for my all round hunting rifle is a trued rem 700 titanium action, no 5 26" barrell plus muzzle break, wyat's extended magazine well, mcmillan hunters edge stock, egw base with night force ultra light ring's with a mk 4 4-14 on top for a all up wieght of 8.2 pounds in 7saum shooting...

great read and very well explanied. maybe the random poor groups are not my doing after all:D

20" for 2912 fps

my sps tactical shoots them well. 26.4 gr varget with a 15-30 thou jamb. i cant seem to get them to work if they are off the lands or at a milder charge

mine is a 26" barrelled tight speced chamber. 4831sc 61gr h1000 65.5 162 amax for both loadings with speed at 3000 for 4831sc and 3020 for h1000. 160 accubond with 61 gr of 4831sc at 2970 for my close range load

it's the removeing of the trigger shoe part that's i'm not sure about. i'm wanting to order and install a jard upgrade kit to a spare trigger i have lying around. whats a good lubication for triggers. i had been using koil but it seems to attract dirt over time. cheers

i normerly have a good understanding of things mecanical and can nut things out my self,but recently got a bit fustrated when trying to get one apart the other week (x-mark pro if it makes a diferance) i tried punching the pins that go through the houseings but they wouldnt budge, is this the...

mine will shoot a ragged hole no matter the recipe. my two favourite loads are 108 berger with 39 grs of adi 2209 105 amax with 41 grns of n160 both with federal match primers and both shoot at 3010 fps in a 28" barrell

i got a sps tactical last week in 223 have only been looking for pressure signs with varget and 75gr amax so far while giving the barrell a light breakin. 26 grns gave me 2840 fps and that was a compressed load. i have 3 cases of 25.5 and 3 of 26 to test grouping when the rain stops