Recent content by kgunz11

Sounds like a fun time!

Baker County www.flintriverprecision.com

I'm in south Georgia and if you haven't found someone yet, I'd be glad to help.

That's common regurgitated misinformation. They are using the same powders that you and I can buy off the shelf. The first lots of ammo produced by Hornady that we received as part of the development team was loaded with Alliant Reloader 26 and it met the speeds quoted on the box. It shot well...

Hornady is now on their 3rd type of powder. The early ammo we received that was loaded with Reloader 26 met the velocity claims on the box.

I'm running at 125psi, because I want the system to, well, FLUSH chips. I use a specific reaming cutting fluid and the specially formulated thinner to reach the viscosity that works well for my application. My fluid runs into the chip pan and through the drain into the machine's coolant...

CST, I am in Georgia, a few hours south of you. I've been using a flush system for 15 years. You're more than welcome to visit my shop and see how I have it set up. It doesn't have to be overcomplicated. Matter of fact, KISS applies here.

I have an MPA BA Hybrid LA chassis in this color: https://masterpiecearms.com/wp-content/uploads/2019/05/2020-Hybrid-Folder-Tiger-Strip-scaled.jpg

I'm a big fan of the 22 Creedmoor. I'm shooting a 75gr Amax 3640fps out of a 26" 1:7tw Benchmark barrel. What it does to a whitetail within 400 yards is impressive. I chambered this barrel with a .060" freebore but my new reamer just showed up with the .097" freebore and that's what I'll be...

Berger shot that bullet in your rifle and gave you the BC based on how it performed in your specific barrel? How much did that cost?

Sorry, didn't realize the thread was so dated. It was included in my "long range news letter".

A gas gun cannot handle the pressure of a bolt gun, +2 tube and adj gas or not. The locking mechanism of the way the bolt works in the carrier with it's relationship to the barrel extension, and the simple design of the rifle's mechanics, dictate this. You need to buy a better chrono. You are...

I don't think he's asking him to fit a Long Action bottom metal to his Medium length Mauser action, which your analogy depicts.

So that's not true, not true at all.

LoL! Which metal is the anode and which is the cathode. C, Mn, P, S, Si, Cr.