Recent content by kato59

He mentioned that the chamber was cut on the SAAMI min. spec. thus the need to FL Size.I also took my sizing die apart and polished the bore out with crocus cloth and scotch brite to try and eliminate the chaffing/wear off the cases.i have been re-loading for at least 20 years and have never...

Hi guys: I had a new left hand remington vsf in .308 rechambered to 300 wsm,i also replaced the bolt with one from PT&G i finally located some norma brass,very tough to find here in Canada.I have loaded and shot some very nice groups using re17 and 180 accubonds,and now after all 100 cases have...

does anyone know or have done a re-chambering of the Savage 110 FCP or the BA from .338 Lapua to the 40*improved version.i have left a message at Accurate Mag. who make and supply Savage with the bottom metal/mags.It looks like the stiffening rib in the front of the mag would need to be...

i wonder if i could install a Seekins DBM that feeds the A.I. lapua,it may involve some inletting though

That is exactly what i was thinking,i am not sure the case will feed properly.and with limited o.a.l. of 3.7" it could be an issue.will wait to hear others chime in:)

P.M. inbound on the 1/8" dot

I am also planning the same build.I started with a left hand rem 700 VSF in .308 and am sending it to my smith next week to re-chamber it to 300WSM.i orderd a new bolt from PT&G and bought a extended magazine box from wyatt's outdoors.After speaking with tom he reccomended a single stack mag.I...