Recent content by jonesse91

Yes I am definitely off of the lands, my gun seems to like a jump into them. That is really surprising, I thought I would be able to get more than 2900 out of a 150 grain bullet from a 7mm mag...

Ah, I apologize for that. I typed that and forgot about the caliber. lightbulb Might be important huh? It is a 7mm Rem Mag. Sorry for the confusion.

Hello, I am running 150 grain Nosler Ballistic Tips out of a ruger 77 with a 24" barrel. I am using WW brass trimmed to 2.490" and neck sized. Seating the bullet to 3.280" OAL using 67.0 grains of H4831sc with a Win WLRM primer and getting 2908 avg. Could someone please run the numbers to let me...

For the record, I wasn't saying I've seen more game killed than long time long ranger. I was stating what I have seen. Not anybody else, nor trying to say I am a know it all. I was simply saying in Animals shot through the vitals with all three of those calibers they do the same thing, they die...

It's a fact. If you really want to see a difference you need to step up to a 340 weatherby. Then yes, you will see a difference. But between those three cartridges, you will not see a difference at all.

Long Time Long Ranger, Your Data is flawed. With a 26" Barrel the 7mm rem mag can easily push a 180 berger vld to 2950. I have done so in a remington sendero using retumbo. The 300 WM with the 210 and 26" can get 3000-3050 probably. Discredit all you want to, but realistically, there is not an...

I am using federal GM215M primers. I have loads worked up from 70.5 to 73.0 grains in half grain incriments. I will get to the range this weekend and post results.

Gave up on H1000 after moving up a grain and a half with no velocity increase. I picked up some retumbo and loaded the accubonds with ww cases, fed gm215m primers, 70.0 grains retumbo and 3.330 oal. The load chronied at 2880 average and shot to about 1.1-1.2 inches with me pulling a shot to open...

I have heard many people say that when you shoot a rifle from the bench it should recoil straight back and not have the muzzle "jump". I find that this is true when I shoot heavy or small bore rifles such as a .243. But when I shoot my 7mm rem mag with a pencil thin barrel the barrel of the...

Thank you very much

Hello, What is the best way to remove acraglas release agent? I tried to rub the action down with Hoppes but it didn't even begin to come off. Thank you

Scratch, What barrel length do you have?

Worked up a load for 70.0 grains of H-1000 Today. It gave me around 2910 fps and 1.25" with the 160 Accubond. Gonna try to work up a little more and see if groups tighten up. If not, may move to the 162 btsp.

Does anybody have any experience with this new rifle from remington yet? Seems new for 2012 and comes in 25-06, 7mm rem mag, and 300 mag. and runs about 750$

Yes I am interested :). The way the remington and winchester brass has been coming in these days is rediculus. About half the lot is salvageable. Thank you.