Recent content by hick135

The current design will use 30 ft tall precast concrete walls with a concrete roof. By my calculations a 45-70 could be shot with an 800 yd zero and I would have about 4 ft of safety room at the apex. Next real question is how much would you realistically be willing to pay to rent it for a day...

I am considering the future design of an 800 yard enclosed range for ballistic testing and true no wind condition load development. My main question is whether or not this is something others would have and interest in. My thoughts are that the final project would be able to be rented out for...

Checking to see if you still have some of the targets. Was curious if you have a pic or specs as to the hole locations on the round targets. I have a gravity reset stand and would like various sizes but the holes must match up. thanks.

Enter Me In The Flatline Ops Contest

Enter Me In The Gunwerks Auto Reset Target Contest

This has all been very helpfull. Thats exactly what i was looking for. I figured i could go up some past the LAWYER allowed max. I just wanted to see if anyone else has. My OAL is quite long to help with the VLDs i should have plenty of room left. Good to know in YOUR rifle you were able...

I am working up a load for my savage 7mm rem mag using winchester brass, federal 215m primers, berger 168 vld hunting, and H4831SC. In doing the ladder method starting at 61gr and workint up to 65gr i only found one node. My last shot with 65gr, the book listed max do not exceed presure, it...

Enter Me In The Berger Bullets Contest

Thats what i was hoping to find out. Guess i will just start working up a load and see how things go. I did the all the bedding, put am quite comfortable saying it is stress free. It was quite a project. But with the steps i went through, any stress points left from the first phase were...

I’m happy to know that you had consistent results from 100 out. I do have access to testing them out to 600, so that should not be the issue though. My question about pressure bedding was because it is a light barrel. I know that with heavy barrels free floating is the way to go, but from...

I picked up a Savage 110 7mm Rem Mag for a good deal and decided to make it my project gun. I both piller bedded and glass bedded the action. Then refinished the stock. I am planning on loading 168gr Berger VLD Hunting bullets with H4831sc powder and Federal 215 primers. I know seating depth is...