Hey guys I wanted to make a video showing what goes into making a long distance shot. I know 1200 yards isn't all that far but hey, it's out there a bit. As you can see conditions were calm and it was a bit cold out. Using the 338 Lapua I had to dial 8.7 mils elevation to make the shot. Let's...
I like my Nightforce NXS but I hear a lot of good things with the ATACR. I got a 30moa rail on my 338 but could have gotten away with a 40 moa scope base. I use the accuracy first scope level and plain out love the thing.
I've been working with the Cutting Edge 338 solid copper MTAC round and it turned out to be very promising. I just finished up my load development and at 200 yards 3 shots touching with 1 flier making the group under 1/2 moa, @ 500 yards 5 shot group 3" with vertical dispersion 1.2", 4 of those...
Whats up Guys, I wanted to share this little video I made shooting the Savage 110BA 338 Lapua at a distance of 2707 yards. I was using 300gr Berger bullets traveling at 2740 FPS. This shot required about 35 mils of hold over, with the nightforce NXS I was able to dial 27.5 mils, back the...
Thanks for the comments everyone!!
Well I've heard a lot from long range shooters that shoot at or past the transonic barrier and they told me it's very common to get the sideways bullet when going transonic to subsonic. I learned that there is a huge pressure wave that will affect the bullet...
Hi guys, a few days ago I took out the Savage 110 BA 338 Lapua and attempted the 2500 yard shot. So I placed the target at 2530 yards or 1.43 miles away, at that distance the bullet flight time is almost 4.5 seconds! Made a short video that I think you guys will enjoy. Thanks for watching!
I...
Hey guys, I"m making a short series on how the Mosin Nagant performes against cinder blocks at various distances with a FMJ bullet. In this video I show what happens to cinder blocks at 300 yards with the Brown Bear FMJ 174gr bullet. Hope you enjoy!
Yes I was getting off center primer hits and they replaced the bolt, bolt carrier, recoil spring and trigger hammer spring. Works like a champ now using Lake City API rounds. I agree the adjustable gas port would be a good idea but like you said, he want's to keep cost down for his customers...
I've done some trigger work to it and bedded the barrel and action. Also I have a tapered front sight post. I previously had only the barrel bedded with electrical tape but my buddy in school wanted to use my rifle in class to bed it and it looks like he did a good job! The ammo used was Brown...
My chamber also seems to be pretty smooth. One thing also was that the gas port on the gas tube to the gas block was a little small. My buddy opened it up a bit and the short stroke went away but still had the miss fire issue. Thats when I sent it in and they completely took care of the issue...
I love my Serbu BFG-50A! I too had some short stroking and miss fire issues and all got fixed very fast by Mark. When I got it back I unloaded a full clip of API's and that was just bad ***!!! Great write up!